Component Inspection
- CHECK CHANGEOVER SWITCH
- Turn Ignition Switch OFF.
- Disconnect Power Window Main Switch (Door Mirror Remote Control Switch) connector.
- Check continuity between Power Window Main Switch (Door Mirror Remote Control Switch) terminals.
Power Window Main Switch (Door Mirror Remote Control Switch)
Condition
Continuity
Terminal
23
7
Changeover Switch
LEFT
Existed
Other than the above
Not existed
28
RIGHT
Existed
Other than the above
Not existed
Is the inspection result normal?
YES
INSPECTION END
NO
Replace Power Window Main Switch (Door Mirror Remote Control Switch). Refer to Removal and Installation .