Component Inspection
- CHECK DOOR MIRROR MOTOR-I
Check that Door Mirror Motor does not trap foreign objects and does not have any damage.
Refer to Disassembly and Assembly .
Is the inspection result normal?
YES
GO TO 2.
NO
Replace door mirror. Refer to Removal and Installation .
- CHECK DOOR MIRROR MOTOR-II
- Turn Ignition Switch OFF.
- Disconnect door mirror connector.
- Apply 12 V to each power supply terminal of Door Mirror Motor.
Door mirror
Operational direction
Connector
Terminal
(+)
(-)
D3 (Driver side)
D33 (Passenger side)
10
11
RIGHT
11
10
LEFT
12
10
UP
10
12
DOWN
Is the inspection result normal?
YES
INSPECTION END
NO
Replace door mirror. Refer to Removal and Installation .