Component Description
|
Item |
Function |
|
BCM |
Controls the door lock system. |
|
IPDM E/R |
Sounds horn and blinks head lamp via CAN communication between BCM |
|
TCM |
Transmits shift position signal to BCM via CAN communication line. |
|
Combination meter |
|
|
Remote keyless entry receiver |
Receives lock/unlock signal from the Intelligent Key, and then transmits to BCM |
|
Inside key antenna |
Detects if Intelligent Key is inside the vehicle |
|
Outside key antenna |
Detects if Intelligent Key is outside the vehicle |
|
Push-button ignition switch |
Inputs push-button ignition switch ON/OFF condition to BCM |
|
Door switch |
Inputs door open/close condition to BCM |
|
Door lock and unlock switch |
|
|
Door request switch |
|
|
Intelligent Key |
The following functions are available when having and carrying electronic ID
|
|
Hazard warning lamp |
Warns the user of the lock/unlock condition and inappropriate operations with the lamps blink |
|
Door lock actuator |
Output lock/unlock signal from BCM and locks/unlocks each door |
|
Fuel lid lock actuator |
Output lock/unlock signal from BCM and locks/unlocks fuel filler lid |
|
Intelligent Key warning buzzer |
Warns the user of the lock/unlock condition and inappropriate operations with the buzzer sound |
|
Unlock sensor |
Detects lock condition of driver door |
|
Trunk closure assembly |
Performs trunk lid open and close operation |
|
Trunk lid opener request switch |
Performs trunk lid open request when it is pressed |
|
Trunk lid opener cancel switch |
Cancels trunk open operation |
|
Trunk rid opener switch |
Performs trunk lid open request when it is pressed |