Diagnosis Procedure

1. Select "DOOR LOCK" of "BCM" using CONSULT.
2. Select "AUTOMATIC LOCK/UNLOCK SELECT" in "WORK SUPPORT" mode.
3. Check "AUTOMATIC LOCK/UNLOCK SELECT" setting in "WORK SUPPORT".

   Refer to CONSULT Function (BCM - DOOR LOCK) .

Is the inspection result normal?

YES

GO TO 2.

NO

Set "Lock Only" or "Lock/Unlock" in "AUTOMATIC LOCK/UNLOCK SELECT".

1. Select "DOOR LOCK" of "BCM" using CONSULT.
2. Select "AUTOMATIC DOOR LOCK SELECT" in "WORK SUPPORT" mode.
3. Check "AUTOMATIC DOOR LOCK SELECT" setting in "WORK SUPPORT".

   Refer to CONSULT Function (BCM - DOOR LOCK) .

Is the inspection result normal?

YES

GO TO 3.

NO

Set "VH SPD" in "AUTOMATIC DOOR LOCK SELECT".

• Replace BCM. Refer to Removal and Installation .
• Confirm the operation after replacement.

Is the result normal?

YES

INSPECTION END

NO

Check intermittent incident. Refer to Intermittent Incident .