Diagnosis Procedure

1. Select "DOOR LOCK" of "BCM" using CONSULT.
2. Select "DOOR LOCK-UNLOCK SET" in "WORK SUPPORT" mode.
3. Check "DOOR LOCK-UNLOCK SET" setting in "WORK SUPPORT".

   Refer to CONSULT Function (BCM - DOOR LOCK) .

Is the inspection result normal?

YES

GO TO 2.

NO

Set "ON" in "DOOR LOCK-UNLOCK SET".

• Replace BCM. Refer to Removal and Installation .
• Confirm the operation after replacement.

Is the result normal?

YES

INSPECTION END

NO

Check intermittent incident. Refer to Intermittent Incident .