Diagnosis Procedure

Check Intelligent Key system symptom table.

Refer to Diagnosis Procedure .

GO TO 2.

For both Intelligent Key that cannot be used for door lock and unlock, check that the Intelligent Key belongs to the vehicle to be checked.

• Check if the Intelligent Key that is checked is the Intelligent Key for a different NISSAN vehicle that the user owns.
• Check that the Intelligent Key buttons match the vehicle specifications.

Does the Intelligent Key belong to the vehicle to be checked?

YES

GO TO 3.

NO

Check Intelligent Key button operation using a registered Intelligent Key that belongs to the vehicle.

Check the inside of the both Intelligent Key for rust or corrosion by water. Simultaneously check the internal circuits for damage.

Is the inspection result normal?

YES

GO TO 4.

NO

Replace Intelligent Key.

1. Register the Intelligent Key again.
2. Check operation after replacement.

Is the inspection result normal?

YES

INSPECTION END

NO

GO TO 5.

1. Replace the Intelligent Key and perform registration again.
2. Check operation after replacement.

Is the inspection result normal?

YES

INSPECTION END

NO

GO TO 6.

1. Replace BCM. Refer to Removal and Installation .
2. Check the operation after replacement.

Is the inspection result normal?

YES

INSPECTION END

NO

Check intermittent incident. Refer to Intermittent Incident .