Diagnosis Procedure
- CHECK INTELLIGENT KEY SYSTEM SYMPTOM TABLE
Check Intelligent Key system symptom table.
Refer to Diagnosis Procedure .
GO TO 2.
- CHECK INTELLIGENT KEY OUTPUT SIGNAL
Use SIGNAL TECH II to check Intelligent Key output signal. For the inspection method and how to use SIGNAL TECH II, refer to "NISSAN/INFINITI SIGNAL TECH II USER GUIDE".
Is the inspection result normal?
YES
GO TO 3.
NO
Replace Intelligent Key.
- REGISTER INTELLIGENT KEY
- Register the Intelligent Key again.
- Check operation after replacement.
Is the inspection result normal?
YES
INSPECTION END
NO
GO TO 4.
- REPLACE INTELLIGENT KEY
- Replace the Intelligent Key and perform registration again.
- Check operation after replacement.
Is the inspection result normal?
YES
INSPECTION END
NO
GO TO 5.
- REPLACE BCM
- Replace BCM. Refer to Removal and Installation .
- Check operation after replacement.
Is the inspection result normal?
YES
INSPECTION END
NO
Check intermittent incident. Refer to Intermittent Incident .