Diagnosis Procedure
- CHECK INTELLIGENT KEY SYSTEM SYMPTOM TABLE
Check Intelligent Key system symptom table.
Refer to Diagnosis Procedure .
GO TO 2.
- CHECK OUTSIDE KEY ANTENNA AND INSIDE KEY ANTENNA
Use SIGNAL TECH II to check each outside key antenna and inside key antenna. For the inspection method and how to use SIGNAL TECH II, refer to "NISSAN/INFINITI SIGNAL TECH II USER GUIDE".
Is the inspection result normal?
YES
GO TO 3.
NO
Repair or replace the malfunctioning parts.
- REGISTER INTELLIGENT KEY
- Register the Intelligent Key again.
- Check operation after replacement.
Is the inspection result normal?
YES
INSPECTION END
NO
GO TO 4.
- REPLACE INTELLIGENT KEY
- Replace the Intelligent Key and perform registration again.
- Check operation after replacement.
Is the inspection result normal?
YES
INSPECTION END
NO
GO TO 5.
- REPLACE BCM
- Replace BCM. Refer to Removal and Installation .
- Check operation after replacement.
Is the inspection result normal?
YES
INSPECTION END
NO
Check intermittent incident. Refer to Intermittent Incident .