Diagnosis Procedure
- CHECK INTELLIGENT KEY SYSTEM SYMPTOM TABLE
Check Intelligent Key system symptom table.
Refer to Diagnosis Procedure .
GO TO 2.
- PERFORM SELF-DIAGNOSIS RESULT
Select "Self Diagnostic Result" mode of "BCM", and check if DTC "B26FF" is detected.
Is DTC "B26FF" detected?
YES
Perform the trouble diagnosis for detected DTC.
NO
GO TO 3.
- CHECK INTELLIGENT KEY BATTERY
Check Intelligent Key battery.
Refer to Component Inspection .
Is the inspection result normal?
YES
GO TO 4.
NO
Repair or replace the malfunctioning parts.
- CHECK REMOTE KEYLESS ENTRY RECEIVER
Check remote keyless entry receiver.
Refer to Component Function Check .
Is the inspection result normal?
YES
GO TO 5.
NO
Repair or replace the malfunctioning parts.
- REPLACE BCM
- Replace BCM. Refer to Removal and Installation .
- Check operation after replacement.
Is the inspection result normal?
YES
INSPECTION END
NO
Check intermittent incident. Refer to Intermittent Incident .