Diagnosis Procedure

1. Select "INTELLIGENT KEY" of "BCM" using CONSULT.
2. Select "AUTO LOCK SET" in "WORK SUPPORT" mode.
3. Check "AUTO LOCK SET" setting in "WORK SUPPORT".

   Refer to CONSULT Function (BCM - INTELLIGENT KEY) .

Is the inspection result normal?

YES

GO TO 2.

NO

Set "MODE 2", "MODE 3", "MODE 4", "MODE 5", "MODE 6" or "MODE 7" in "AUTO LOCK SET".

• Replace BCM. Refer to Removal and Installation .
• Confirm the operation after replacement.

Is the result normal?

YES

INSPECTION END

NO

Check intermittent incident. Refer to Intermittent Incident .