Rear Door Closure Control Unit: Fail-safe
- Rear door closure control unit judges that a malfunction (foreign material pinching, motor malfunction, or reverse switch malfunction) occurs if fully closed status of rear door cannot be detected when more than 2.5 seconds are passed after retracting operation of rear door closure motor is started. Rear door closure control unit stops retracting operation of rear door closure motor and operates rear door closure motor in reverse direction to the neutral position. Rear door auto closure system is not operative until rear door closure control unit detects operation of outside door handle or inside door handle.
- Rear door closure control unit judges that a malfunction (motor malfunction or neutral switch malfunction) occurs if neutral switch signal cannot be detected when more than 0.5 seconds are passed after retracting operation of rear door closure motor is started. Rear door closure control unit stops retracting operation of rear door closure motor and operates rear door closure motor in reverse direction to the neutral position.