Component Function Check

1. Check that trunk lid is fully closed.
2. Check that Trunk Lid Opener Cancel Switch is turned ON.
3. Select "INTELLIGENT KEY" of "BCM" using CONSULT.
4. Select "TRUNK/GLASS HATCH" in "ACTIVE TEST" mode.
5. Touch "OPEN" to check that trunk lid opens normally.

Is the inspection result normal?

YES

GO TO 2.

NO

Refer to Diagnosis Procedure .

1. Close trunk lid manually to the half latched position. (Clicking noise is heard.)
2. Check that trunk lid is retracted to the fully closed position and locked.

Is the inspection result normal?

YES

INSPECTION END

NO

Refer to Diagnosis Procedure .