Diagnosis Procedure
- PERFORM ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) SELF-DIAGNOSIS
With CONSULT
Perform self-diagnosis for "ABS".
Is any DTC detected?
YES
Check malfunctioning circuit.
NO
GO TO 2.
- CHECK LOW TIRE PRESSURE WARNING CONTROL UNIT INPUT/OUTPUT SIGNAL
Check the low tire pressure warning control unit input/output signal values. Refer to Reference Value .
Is the inspection result normal?
YES
Check pin terminal and connection of each harness connector for malfunctioning conditions.
NO
Replace the low tire pressure warning control unit. Refer to Removal and Installation .