LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2018 >> Q70 5.6 Luxe, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seats (Except Hybrid) >> Removal And Installation >> Rear Seat >> Disassembly and Assembly >> Seatback

Disassembly and Assembly: Seatback

DISASSEMBLY 

  1. Remove mounting bolts, and then remove seat belt guide LH and RH.
  2. Remove mounting bolts. Remove seatback bracket LH, seatback bracket RH and center seatback bracket.
  3. Remove the headrest holder.
    G04146145Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION: Before installing headrest holder check its orientation. (front/rear and right/left)
  4. Remove hog rings and remove seatback trim from seatback pad.
  5. Disconnect seat heater controller connector and then remove seat heater controller mounting bolt.
  6. Disconnect seatback heater harness and then remove seatback heater.

ASSEMBLY 

Assemble in the reverse order of disassembly.

CAUTION: Install the hog rings of seat trim in position, and then securely connect the trim or trim cord with the pad side wire.
scientia non olet · About LEMON Manuals