LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2018 >> Q70 5.6 Luxe, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Automatic Drive Positioner (Except Hybrid) >> Symptom Diagnosis >> Normal Operating Condition >> Description

Normal Operating Condition: Description

The following symptoms are normal operations, and they do not indicate a malfunction.

Symptom

Cause

Action to take

Reference

Entry/exit assist function and seat synchronization do not operate.

No initialization has been performed.

Perform initialization.

Description 

Entry/exit assist function is disabled.

NOTE: The entry/exit assist function and seat synchronization function are disabled before delivery (initial setting).

Change the settings.

Description 

Telescopic does not operate by entry/exit assist function.

Telescopic is not interlocked with entry/exit assist function.

--

Exit assist function:

System Description 

Entry assist function:

System Description 

Entry assist function does not operate.

Manual operation with power seat switch was performed after exit assist function execution.

Perform the memory function.

System Description 

Seat synchronization function does not operate.

Either the entry/exit assist function (seat) or the entry/exit assist function (steering) is disabled.

Enable both functions.

Description 

The synchronization function will not operate if the steering (tilt, telescopic) or the door mirror moves to the operating end while the seat synchronization function is operating.

Perform the memory function

or

drive the vehicle at more than

7 km/h (4 MPH).

System Description 

Seat adjustment load has exceed any of the volumes below.

  • Seat sliding: 76 mm
  • Seat reclining: 9.1 degrees
  • Seat lifting (rear): 20 mm

--

--

Lumbar support does not perform memory operation.

The lumbar support system are controlled independently with no link to the Automatic Drive Positioner System.

--

Lumbar support system:

System Description

Memory function, entry/exit assist function, seat synchronization function, or Intelligent Key interlock function does not operate.

The operating conditions are not fulfilled.

Fulfill the operation conditions.

Seat synchronization

function: System Description 

Memory function:

System Description 

Exit assist function:

System Description 

Entry assist function:

System Description 

Seat synchronization

function: System Description 

Intelligent Key interlock function: System Description