Diagnosis Procedure
- CHECK STEERING TILT MECHANISM
Check for the following.
- Mechanism deformation or pinched foreign materials.
- Interference with other parts because of poor installation.
Is the inspection result normal?
YES
GO TO 2.
NO
Repair or replace the malfunction parts.
- CHECK TILT SWITCH
Check tilt switch.
Refer to Component Function Check .
Is the inspection result normal?
YES
GO TO 3.
NO
Repair or replace the malfunction parts.
- CHECK TILT MOTOR
Check tilt motor.
Refer to Component Function Check .
Is the inspection result normal?
YES
GO TO 4.
NO
Repair or replace the malfunction parts.
- CONFIRM THE OPERATION
Check the operation again.
Is the result normal?
YES
Check intermittent incident. Refer to Intermittent Incident .
NO
GO TO 1.