DTC Index
|
CONSULT display |
Timing *1 |
Item |
Reference |
|
|
Current malfunction |
Previous malfunction |
|||
|
CAN COMM CIRCUIT [U1000] |
0 |
1-39 |
CAN communication |
|
|
CONTROL UNIT [U1010] |
0 |
1-39 |
Control unit |
|
|
SEAT SLIDE [B2112] |
0 |
1-39 |
Seat slide motor output |
|
|
SEAT RECLINING [B2113] |
0 |
1-39 |
Seat reclining motor output |
|
|
STEERING TILT [B2116] |
0 |
1-39 |
Tilt motor output |
|
|
UART COMM [B2128] |
0 |
1-39 |
UART communication |
|
|
EEPROM [B2130] |
0 |
1-39 |
EEPROM |
|
*1 :
- 0: Current malfunction is present
- 1-39: Displayed if any previous malfunction is present when current condition is normal. The numeral value increases by one at each IGN ON to OFF cycle from 1 to 39. The counter remains at 39 even if the number of cycles exceeds it. However, the counter is reset to 1 if any malfunction is detected again, the normal operation is resumed and the ignition switch is turned from OFF to ON.