LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2018 >> Q70 5.6 Luxe, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Automatic Drive Positioner (Except Hybrid) >> Basic Inspection >> Inspection And Adjustment >> System Initialization >> Special Repair Requirement >> Initialization Procedure

Initialization Procedure

  1. CHOOSE METHOD 

    There are two initialization methods.

    Which method do you use?

    With door switch

    GO TO 2.

    With vehicle speed

    GO TO 4.

  2. STEP A-1 

    Turn ignition switch from ACC to OFF position.

    GO TO 3.

  3. STEP A-2 

    Driver door switch is ON (open) -> OFF (close) -> ON (open).

    END

  4. STEP B-1 

    Drive the vehicle at more than 25 km/h (16 MPH).

    END

scientia non olet · About LEMON Manuals