LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2018 >> Q70 5.6 Luxe, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Automatic Drive Positioner (DTC/Circuit Diagnosis) (Except Hybrid) >> DTC/Circuit Diagnosis >> Telescopic Switch >> Component Inspection

Component Inspection

  1. CHECK TELESCOPIC SWITCH 
    1. Turn Ignition Switch OFF.
    2. Disconnect Tilt & Telescopic Switch connector.
    3. Check continuity between Tilt & Telescopic Switch terminals.

      Telescopic Switch

      Condition

      Continuity

      Terminal

      1

      2

      Telescopic Switch (forward)

      Operate

      Existed

      Release

      Not existed

      3

      Telescopic Switch (backward)

      Operate

      Existed

      Release

      Not existed

    Is the inspection result normal?

    YES

    INSPECTION END

    NO

    Replace Tilt & Telescopic Switch. Refer to Removal and Installation .

scientia non olet · About LEMON Manuals