LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2018 >> Q70 5.6 Luxe, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Automatic Drive Positioner (DTC/Circuit Diagnosis) (Except Hybrid) >> DTC/Circuit Diagnosis >> Mirror Sensor >> Component Function Check

Component Function Check

  1. CHECK FUNCTION 
    1. Select "MIR/SEN LH U-D", "MIR/SEN LH R-L" in "Data monitor" with CONSULT.
    2. Check mirror sensor (driver side) signal under the following condition.

      Monitor item

      Condition

      Value

      MIR/SEN LH U-D

      Door mirror (driver side)

      Change between

      3.4 [V] (close to peak)

      0.6 [V] (close to valley)

      MIR/SEN LH R-L

      Change between

      0.6 [V] (close to left edge)

      3.4 [V] (close to right edge)

    Is the indication normal?

    YES

    INSPECTION END

    NO

    Perform diagnosis procedure. Refer to Diagnosis Procedure .

scientia non olet · About LEMON Manuals