Component Description

Components

Description

Automatic Drive Positioner Control Unit

Door mirror is supplied with power after receiving the input of mirror switch and Changeover Switch.

Power Window Main Switch

(Door Mirror Remote Control Switch)

Mirror Switch

It transmits mirror face adjust operation to Automatic Drive Positioner Control Unit.

Changeover Switch

It transmits the LH/RH control of door mirror that supplies power to Automatic Drive Positioner Control Unit.

Open/Close Switch

Power is supplied to folding mirror from Door Mirror Remote Control Switch when operating switch.

Door Mirror

It makes mirror face operate from side to side and up and down via integrated motor.

BCM

The Ignition Switch signal (ACC/ON) is transmitted to Driver Seat Control Unit via CAN communication.

Driver Seat Control Unit

The Ignition Switch signal (ACC/ON) is transmitted to Automatic Drive Positioner Control Unit via UART communication.

TCM

The A/T shift position signal is transmitted to Driver Seat Control Unit via CAN communication.