Diagnosis Procedure

CHECK FUSE
1. Turn ignition switch OFF.
2. Check 10 A fuse [No. 13, located in fuse block (J/B)].
Is the inspection result normal?

YES

GO TO 2.

NO

Replace the blown fuse after repairing the affected circuit if a fuse is blown.

CHECK FUSE BLOCK (J/B)

Turn ignition switch ON.

Check voltage between fuse block (J/B) (fuse block side) and ground.

(+)		(-)	Condition		Voltage (V) (Approx.)
Fuse block (J/B)
Connector	Terminal
M3	9C	Ground	Rear window defogger switch	ON	Battery voltage
				OFF	0
	10C			ON	Battery voltage
				OFF	0

Is the inspection result normal?

YES

INSPECTION END.

NO

Replace fuse block (J/B).