Diagnosis Procedure
- COMBINATION SWITCH INSPECTION
Check combination switch. Refer to Symptom Table .
Is the inspection result normal?
YES
GO TO 2.
NO
Repair or replace the malfunctioning part.
- CHECK FRONT FOG LIGHT REQUEST SIGNAL
With CONSULT
- Turn power switch ON.
- Select "FR FOG REQ" in "Data Monitor" mode of "IPDM E/R" using CONSULT.
- With operating the front fog lamp switch, check the monitor status.
Monitor item
Condition
Monitor status
FR FOG REQ
Front fog lamp switch
(With lighting switch 1ST)
ON
On
OFF
Off
Is the inspection result normal?
YES
Perform the front fog lamp diagnosis. Refer to Component Function Check .
NO
Replace BCM. Refer to Removal and Installation .