Disc Rotor: Remove & Replace
WARNING: This page is about the Q60 Luxe, 2.0L Eng VIN C, AWD, which is a different variant/trim than selected.
Includes: Repack Wheel Bearings (where applicable) and replace Pads (if necessary).
DOES NOT include refinishing.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Front or Rear,Both Sides | 1.0 | B | ||
| Front or Rear,One Side | 0.6 | B | ||
| Combination Procedure: DISC ROTOR: Burnish Brake Rotors While Driving Vehicle: | ||||
| 0.5 | B | |||
| Combination Procedure: DISC ROTOR: Correct: | ||||
| Lateral Runout,Each | Correct Rotor lateral runout by indexing or correction plate. | 0.2 | B | |
| Combination Procedure: DISC ROTOR (REMOVED): Refinish: DOES NOT include grind hot spots. | ||||
| Each Additional | 0.3 | B | ||
| One | 0.5 | B | ||