LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2017 >> QX80 Limited >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Power Outlet (Ac 120 V Outlet) >> Circuit Diagnosis >> Ac 120 V Outlet Main Switch Power Supply Circuit >> Diagnosis Procedure

Diagnosis Procedure

  1. CHECK FUSE

    Check that the following fuse is not blown.

    Signal name Fuse No.
    Ignition power supply 3

    Is the fuse fusing?

    YES 

    Replace the blown fuse after repairing the affected circuit if a fuse is blown.

    NO 

    GO TO STEP 2. 

  2. CHECK POWER SUPPLY FOR AC 120 V OUTLET MAIN SWITCH

    1. Turn ignition switch ON.
    2. Check for voltage between the AC 120 V main switch harness connector and ground.
      Terminals Condition Voltage
      (Approx.)
      (+) (-)
      AC 120 V outlet main switch Ground Ignition switch
      Connector Terminal
      M144 1 OFF 0 V
      ON Battery voltage

    Is the inspection result normal?

    YES 

    INSPECTION END

    NO 

    Repair the AC 120 V main switch power supply circuit.