LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2017 >> QX80 Limited >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Door & Lock (DTC/Circuit Diagnosis) >> DTC/Circuit Diagnosis >> Combination Meter Buzzer >> Component Function Check

Component Function Check

  1. CHECK FUNCTION

    1. Select "INTELLIGENT KEY" of "BCM" using CONSULT.
    2. Select "INSIDE BUZZER" in "ACTIVE TEST" mode.
    3. Touch "Key", "Knob" or "Take Out" to check that it works normally.

    Is the inspection result normal?

    Yes 

    Combination meter buzzer is OK.

    No 

    Refer to DIAGNOSIS PROCEDURE .

scientia non olet · About LEMON Manuals