LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2017 >> QX80 Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Driver Assistance System - Lane Departure Warning & Lane Departure Prevention (LDW & LDP) (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> Warning Systems Switch Circuit >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2016 Infiniti QX50. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK WARNING SYSTEMS SWITCH SIGNAL BY CONSULT

    G-20 CONSULT DATA MONITOR

    1. Turn the ignition switch ON.
    2. Select "LDW SW" of "LANE CAMERA "data monitor item.
    3. With operating the warning systems switch, check the monitor status.
    Monitor item Condition Monitor status
    LDW SW Warning systems switch Pressed ==> Released On ==> Off

    Is the item status normal?

    YES 

    Warning systems switch circuit is normal.

    NO 

    Refer to DIAGNOSIS PROCEDURE .

scientia non olet · About LEMON Manuals