LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2017 >> QX80 Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Driver Assistance System - Lane Departure Warning & Lane Departure Prevention (LDW & LDP) (Symptom Diagnosis & Removal And Installation)) >> System Description >> Diagnosis System [Abs Actuator And Electric Unit (Control Unit)] >> Consult Function >> Function

Consult Function: Function

WARNING: This page is about a different car, the 2016 Infiniti QX50. However, it is still accessible from the selected car via links, so may be relevant.

CONSULT can display each diagnostic item using the diagnostic test modes shown in the table below.

Diagnostic test mode Function
Work support This mode enables a technician to adjust some devices faster and more accurately by following the indications on CONSULT.
Self diagnostic result Self-diagnostic results can be read and erased quickly.
Data monitor Input/Output data in the ABS actuator and electric unit (control unit) can be read.
Active test CONSULT drives some actuators apart from ABS actuator and electric unit (control unit) and also shifts some parameters in a specified range.
ECU identification ABS actuator and electric unit (control unit) part number can be read.
Specific data monitor Specific LDP data in the ABS actuator and electric unit (control unit) can be read.
scientia non olet · About LEMON Manuals