LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2017 >> QX80 Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Driver Assistance System - Lane Departure Warning & Lane Departure Prevention (LDW & LDP) (Symptom Diagnosis & Removal And Installation)) >> Basic Inspection >> Pre-Inspection For Diagnosis >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2016 Infiniti QX50. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK CAMERA LENS AND WINDSHIELD

    Are camera lens and windshield contaminated with foreign materials?

    YES 

    Clean camera lens and windshield.

    NO 

    GO TO STEP 2  .

  2. CHECK LANE CAMERA UNIT INSTALLATION CONDITION

    Check lane camera unit installation condition (installation position, properly tightened, a bent bracket).

    Is it properly installed?

    YES 

    GO TO STEP 3  .

    NO 

    Install lane camera unit properly, and perform camera aiming. Refer to DESCRIPTION .

  3. CHECK VEHICLE HEIGHT

    Check vehicle height. Refer to WHEEL ARCH HEIGHT (2WD) or WHEEL ARCH HEIGHT (AWD).

    Is vehicle height appropriate?

    YES 

    INSPECTION END

    NO 

    Repair vehicle to appropriate height.