Component Inspection

REMOVE FUEL LEVEL SENSOR UNIT AND FUEL PUMP

Remove the fuel level sensor unit and fuel pump. Refer to REMOVAL AND INSTALLATION .

GO TO STEP 2.

CHECK FUEL LEVEL SENSOR UNIT AND FUEL PUMP

Check the resistance between fuel level sensor unit and fuel pump.

Courtesy of NISSAN NORTH AMERICA, INC.

Terminals		Condition	Resistance (Ω) (Approx.)	Height [mm (in)]
Fuel level sensor unit and fuel pump
2	5	Full^* (A)	46.0	280.7 (11.05)
		Empty^* (B)	283.0	29.4 (1.157)

* : When float rod is contact with stopper.

Is inspection result OK?

YES

INSPECTION END

Replace fuel level sensor unit and fuel pump. Refer to REMOVAL AND INSTALLATION .