Diagnostic Test

WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

CHECK THE MOTOR

Turn the ignition switch OFF.
Disconnect steering force motor harness connector.

Check the continuity between motor connector terminals.

Steering force motor		Continuity
Terminal		Continuity
1	2	Existed
1	3	Existed
1	5	Not existed
2	3	Existed
2	5	Not existed
3	5	Not existed

Is the inspection result normal?

YES

INSPECTION END

Steering force motor is malfunction. Replace steering column assembly. Refer to REMOVAL AND INSTALLATION .