DTC Detection Logic
WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
| DTC |
Display item
(Trouble diagnosis content) |
Malfunction detection condition |
| C1AD0 |
POWER SUPPLY BACKUP UNIT VOLT-2
(Power supply backup unit voltage-2) |
- An internal malfunction (overvoltage) is detected in the brake power supply backup unit.
- Power voltage of brake power supply backup unit is as shown below.
- Power voltage of brake power supply backup unit: 9 V ≥ Power voltage of brake power supply backup unit
- Power voltage of brake power supply backup unit: 16 V ≤ Power voltage of brake power supply backup unit
|