DTC Detection Logic
WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
| DTC |
Display item
(Trouble diagnosis content) |
Malfunction detection condition |
| C1AC0 |
CONTROL MODULE TEMP-2
(Control module temperature-2) |
- Temperature signal of control module that is integrated with electrically-driven intelligent brake unit is as shown below.
- Control module temperature signal: - 50°C (- 122°F) ≥ Control module temperature signal
- Control module temperature signal: 150°C (302°F) ≤ Control module temperature signal
- A malfunction is detected in the temperature detection circuit of the control module that is integrated with the electrically-driven intelligent brake unit.
|