LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2017 >> QX70 RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 211 (Brake Control System (Diagnostic Trouble Codes (DTCS) C1AC0-U1511 And Circuit Diagnosis) (Hybrid)) >> DTC / Circuit Diagnosis >> Brake System Warning Lamp >> Diagnosis Procedure >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK POWER AND GROUND CIRCUITS OF ELECTRICALLY-DRIVEN INTELLIGENT BRAKE UNIT

    Perform diagnosis of electrically-driven intelligent brake unit power and ground circuits. Refer to DIAGNOSIS PROCEDURE .

    Is the inspection result normal?

    YES 

    GO TO STEP 2  .

    NO 

    Repair or replace error-detected parts.

  2. PERFORM SELF-DIAGNOSIS

    G-20 With CONSULT

    Start CONSULT perform "BRAKE" and "ABS" self-diagnosis.

    Is a malfunction detected?

    YES 

    Check the malfunctioning system.

    NO 

    GO TO STEP 3  .

  3. CHECK BRAKE SYSTEM WARNING LAMP ILLUMINATION

    Check the combination meter. Refer to CONSULT FUNCTION .

    Is the inspection result normal?

    YES 

    Replace the electrically-driven intelligent brake unit. Refer to REMOVAL AND INSTALLATION .

    NO 

    Replace the combination meter. Refer to REMOVAL AND INSTALLATION .