LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2017 >> QX70 RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 191 (Hybrid Battery System (Introduction And Diagnostic Trouble Codes (DTCS)) P0A09-P0C6E) (Hybrid)) >> System Description >> Diagnosis System (LBC) >> Consult Function >> Self-Diagnosis Result >> How To Erase DTC And 1ST Trip DTC

How To Erase DTC And 1ST Trip DTC

WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

If the ignition switch stays ON after repair work, be sure to turn ignition switch OFF once. Wait at least 10 seconds and then turn it ON (engine stopped) again.

  1. Select "HV BAT" with CONSULT.
  2. Select "SELF-DIAG RESULTS".
  3. Touch "ERASE". (DTC in LBC will be erased.)