LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2017 >> QX70 RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 191 (Hybrid Battery System (Introduction And Diagnostic Trouble Codes (DTCS)) P0A09-P0C6E) (Hybrid)) >> DTC / Circuit Diagnosis >> DTC P0A9D: Hybrid Battery Temperature Sensor A >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK BATTERY TEMPERATURE SENSOR 1

    1. Remove battery temperature sensor. Refer to EXPLODED VIEW WITH TORQUE SPECIFICATIONS .
    2. Check resistance between battery temperature sensor 1 terminals.
    Terminals Condition Resistance (kΩ)
    25 and 29 Temperature 10°C (50°F) Approx. 7.4
    25°C (77°F) Approx. 4.0
    40°C (104°F) Approx. 2.3

    Is the inspection result normal?

    YES 

    INSPECTION END

    NO 

    Replace battery temperature sensor. Refer to EXPLODED VIEW WITH TORQUE SPECIFICATIONS .

scientia non olet · About LEMON Manuals