LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2017 >> QX70 RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 190 (Seats (DTC/Circuit Diagnosis) (Hybrid)) >> DTC/Circuit Diagnosis >> Heated Seat Relay >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK HEATED SEAT RELAY

    1. Turn ignition switch OFF.
    2. Disconnect heated seat relay.
    3. Check continuity between heated seat relay terminals.
    Terminal Condition Continuity
    WHITE-3 WHITE-5 12 V direct current supply between terminals WHITE-1 and WHITE-2 . Existed
    No current supply Not existed
    G04889330Courtesy of NISSAN NORTH AMERICA, INC.

    Is the inspection result normal?

    YES 

    INSPECTION END

    NO 

    Replace heated seat relay.

scientia non olet · About LEMON Manuals