Can System Specification Chart: Notes

WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Refer to TROUBLE DIAGNOSIS FLOW CHART for how to use CAN system specification chart.

Body type	Sedan
Axle	2WD		AWD
Engine	VQ35HR-HM34
Transmission	A/T
Brake control	VDC
Lane departure warning system		*		*
CAN system type	1	2	3	4
CAN communication control unit
ECM	*	*	*	*
Data link connector	*	*	*	*
IPDM E/R	*	*	*	*
HPCM	*	*	*	*
CAN gateway	*	*	*	*
A/C auto amp.	*	*	*	*
Combination meter	*	*	*	*
AFS control unit		*		*
Air bag diagnosis sensor unit	*	*	*	*
Display control unit	*	*	*	*
High beam assist control module		*		*
TCU	*	*	*	*
BCM	*	*	*	*
ABS actuator and electric unit (control unit)	*	*	*	*
Electrically-driven intelligent brake unit	*	*	*	*
Driver seat control unit	*	*	*	*
Pre-crash seat belt control unit (driver side)		*		*
Approaching vehicle sound for pedestrians (VSP) control unit	*	*	*	*
ADAS control unit	*	*	*	*
Steering force control module	*	*	*	*
AWD control unit			*	*
Chassis control module	*	*	*	*
Steering angle sensor	*	*	*	*
ITS communication control unit
Side radar LH	*	*	*	*
Side radar RH	*	*	*	*
Around view monitor control unit	*	*	*	*
Accelerator pedal actuator	*	*	*	*
Driver assistance buzzer control module	*	*	*	*
Sonar control unit	*	*	*	*
ICC sensor	*	*	*	*
HEV system CAN control unit
ECM	*	*	*	*
Traction motor inverter	*	*	*	*
TCM	*	*	*	*
Data link connector	*	*	*	*
HPCM	*	*	*	*
Sub electric oil pump inverter	*	*	*	*
Li-ion battery controller	*	*	*	*
Chassis communication control unit
Steering angle main control module	*	*	*	*
ADAS control unit	*	*	*	*
Lane camera unit		*		*