Removal And Installation: Removal

WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

Remove transmission assembly with engine from the vehicle. Refer to REMOVAL AND INSTALLATION .
Remove following parts from transmission assembly.
- Manual lever and control rod. Refer to EXPLODED VIEW WITH TORQUE SPECIFICATIONS
- Air breather hose and air breather tube. Refer to EXPLODED VIEW WITH TORQUE SPECIFICATIONS .
- Fluid warmer tube. Refer to EXPLODED VIEW WITH TORQUE SPECIFICATIONS .
- Heat insulators
Remove bolts fixing transmission assembly and engine with a power tool.
WARNING:
To prevent electric shock hazards, be sure to wear protective gear.
Separate transmission assembly from engine.
WARNING:
To prevent electric shock hazards, be sure to wear protective gear.
Remove transfer assembly from transmission assembly. Refer to REMOVAL AND INSTALLATION . (AWD models)
WARNING:
To prevent electric shock hazards, be sure to wear protective gear.