Equipotential Test
WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
After installing transmission assembly, measure resistance below.
- Between transmission (aluminum part) and body (ground bolt)
- Between transmission (aluminum part) and electric compressor (aluminum part).
WARNING:
To prevent electric shock hazards, be sure to put on insulating protective gear before beginning work on the high voltage system.
| Standard | : Less than 0.1 Ω |
If result deviates from standard values, check that no paint, oil, dirt, or other substance is clinging to bolts or conductive mounting parts. If any such substance is clinging, clean the surrounding area and remove the substance.