Removal And Installation: Removal

WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

Shift the selector lever to "P" position.

Remove nut (

) and remove the control rod

from the lower lever of A/T shift selector assembly.

Courtesy of NISSAN NORTH AMERICA, INC.

	: 2WD models
	: AWD models
	: Vehicle front

Remove nut (

) and remove the manual lever

(with control rod) from A/T assembly.

Courtesy of NISSAN NORTH AMERICA, INC.

CAUTION:

When loosening manual lever mounting nut, set manual lever in "N" position and fix the manual lever to prevent it from moving.

Courtesy of NISSAN NORTH AMERICA, INC.

	: D position
	: N position
	: R position
	: P position
	: Vehicle front

Remove snap pin, control rod, conical washer, plain washers, collar, and insulator from manual lever.