Removal And Installation
WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
- Release the lock knob at the back of the Intelligent Key and remove the mechanical key.
- Insert remover tool (A) wrapped with a cloth into the slit of the corner and twist it to separate the upper part from the lower part.CAUTION:
- Never touch the circuit board or battery terminal.
- The keyfob is water-resistant. However, if it does get wet, immediately wipe it dry.
- Replace the battery with new one.
Battery replacement : Coin-type lithium battery (CR2032) - Align the tips of the upper and lower parts, and then push them together until it is securely closed.CAUTION:
- When replacing battery, keep dirt, grease, and other foreign materials off the electrode contact area.
- After replacing the battery, check that all Intelligent Key functions work normally.