Clutch 1 Position Learning: Description

WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

"Clutch 1 Position Learning" is a function of HPCM to learn the initial position of the clutch 1 by monitoring the clutch 1 stroke sensor out put signal. It must be performed as per the following conditions:

HPCM is replaced.
Clutch 1 and clutch cover is replaced.
Concentric slave cylinder (CSC) is replaced.

For details, refer to WORK PROCEDURE .