Component Inspection

1. Turn Ignition Switch OFF.
2. Disconnect Door Switch connector.
3. Check Door Switch terminals.

   Terminal			Door Switch Condition	Continuity
   Door Switch
   Each door	2	Ground part of door Switch	Pressed	Not existed
   			Released	Existed
   Back Door	7	8	Pressed	Not existed
   			Released	Existed

Is the inspection result normal?

YES 

INSPECTION END

NO 

Replace malfunction Door Switch.

• Door Switch: Refer to REMOVAL AND INSTALLATION .
• Back Door Lock Assembly (Back Door Switch): Refer to REMOVAL AND INSTALLATION .