DTC Index
| CONSULT Display | Timing*1 | Item | Reference | |
|---|---|---|---|---|
| Current Malfunction | Previous Malfunction | |||
| CAN COMM CIRCUIT [U1000] |
0 | 1-39 | CAN Communication | DTC LOGIC |
| SEAT SLIDE [B2112] |
0 | 1-39 | Seat Slide Motor Output | DTC LOGIC |
| SEAT RECLINING [B2113] |
0 | 1-39 | Seat Reclining Motor Output | DTC LOGIC |
| TILT SENSOR [B2118] |
0 | 1-39 | Tilt Sensor Input | DTC LOGIC |
| TELESCO SENSOR [B2119] |
0 | 1-39 | Telescopic Sensor Input | DTC LOGIC |
| DETENT SW [B2126] |
0 | 1-39 | Detention Switch Condition | DTC LOGIC |
| UART COMM [B2128] |
0 | 1-39 | UART Communication | DTC LOGIC |
*1 :
- 0: Current malfunction is present
- 1-39: Displayed if any previous malfunction is present when current condition is normal. The numeral value increases by one at each IGN ON to OFF cycle from 1 to 39. The counter remains at 39 even if the number of cycles exceeds it. However, the counter is reset to 1 if any malfunction is detected again, the normal operation is resumed and the Ignition Switch is turned from OFF to ON.