Except Direct Adaptive Steering: Adjustment: Toe-In

WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

Loosen the steering outer socket, and then adjust the length using steering inner socket.

Toe-in : Refer to WHEEL ALIGNMENT .
CAUTION:
- Always evenly adjust both toe-in alternately and adjust the difference between the left and right to the standard.
- Always fix the steering inner socket when tightening the steering outer socket.
After toe-in adjustment, adjust neutral position of steering angle sensor. Refer to WORK PROCEDURE .