DTC Confirmation Procedure

WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

CHECK DTC PRIORITY

If DTC P0AC0, P0AC1 or P0AC2 is displayed with DTC P30FC, first perform the confirmation procedure (trouble diagnosis) for DTC P0AC0, P0AC1 or P0AC2.

Is applicable DTC detected?

YES

Perform diagnosis of applicable.
- P0AC0: Refer to DTC DESCRIPTION .
- P0AC1: Refer to DTC DESCRIPTION .
- P0AC2: Refer to DTC DESCRIPTION .
NO

GO TO STEP 2 .

PERFORM DTC CONFIRMATION PROCEDURE

WITH CONSULT
1. Select "DATA MONITOR" mode of "HV BAT" using CONSULT."
2. Drive the vehicle, according to driving pattern B.
  
  Driving pattern B : DRIVING PATTERN
Is P30FC detected?

YES

Refer to DIAGNOSIS PROCEDURE .

NO-1

To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .

NO-2

Confirmation after repair: INSPECTION END