DTC Confirmation Procedure

WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

CHECK DTC PRIORITY

If DTC P0AC0, P0AC1 or P0AC2 is displayed with DTC P30F2, first perform the confirmation procedure (trouble diagnosis) for DTC P0AC0, P0AC1 or P0AC2.

Is applicable DTC detected?

YES

Perform diagnosis of applicable.
- P0AC0: Refer to DTC DESCRIPTION .
- P0AC1: Refer to DTC DESCRIPTION .
- P0AC2: Refer to DTC DESCRIPTION .
NO

GO TO STEP 2 .

PERFORM DTC CONFIRMATION PROCEDURE

WITH CONSULT
1. Turn ignition switch ON and wait at least 10 seconds.
2. Select "Self Diagnostic Result" mode of "HV BAT" using CONSULT.
Is P30F2 detected?

YES

Refer to DIAGNOSIS PROCEDURE .

NO-1

To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .

NO-2

Confirmation after repair: INSPECTION END