DTC Confirmation Procedure
WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK DTC PRIORITY
If DTC P30E2 is displayed with DTC UXXXX, first perform the confirmation procedure (trouble diagnosis) for DTC UXXXX.
Is applicable DTC detected?
YES
Perform diagnosis of applicable. Refer to DTC INDEX .
NO
GO TO STEP 2 .
- PERFORM DTC CONFIRMATION PROCEDURE
WITH CONSULT
- Turn ignition switch ON and wait at least 5 seconds.
- Select "Self Diagnostic Result" mode of "HV BAT" using CONSULT.
Is P30E2 detected?
YES
Refer to DIAGNOSIS PROCEDURE .
NO-1
To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .
NO-2
Confirmation after repair: INSPECTION END