DTC Detection Logic
WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
| DTC | Trouble diagnosis (Trouble diagnosis contents) |
Detecting condition |
|---|---|---|
| P308B | CELL CONT ASIC1 OPEN (Cell controller application specific integrated circuit1 open) |
When a cell voltage recognized by the Li-ion battery controller is lower than 1.25 V or higher than 4.65 V. |
| P308C | CELL CONT ASIC2 OPEN (Cell controller application specific integrated circuit2 open) |
|
| P308D | CELL CONT ASIC3 OPEN (Cell controller application specific integrated circuit3 open) |
|
| P308E | CELL CONT ASIC4 OPEN (Cell controller application specific integrated circuit4 open) |
|
| P308F | CELL CONT ASIC5 OPEN (Cell controller application specific integrated circuit5 open) |
|
| P3090 | CELL CONT ASIC6 OPEN (Cell controller application specific integrated circuit6 open) |
|
| P3091 | CELL CONT ASIC7 OPEN (Cell controller application specific integrated circuit7 open) |
|
| P3092 | CELL CONT ASIC8 OPEN (Cell controller application specific integrated circuit8 open) |
|
| P3093 | CELL CONT ASIC9 OPEN (Cell controller application specific integrated circuit9 open) |
|
| P3094 | CELL CONT ASIC10 OPEN (Cell controller application specific integrated circuit10 open) |
|
| P3095 | CELL CONT ASIC11 OPEN (Cell controller application specific integrated circuit11 open) |
|
| P3096 | CELL CONT ASIC12 OPEN (Cell controller application specific integrated circuit12 open) |